New DynoMAX Connectors

#B9300 - DynoMAX XT150 Red Connectors

#B9302 - DynoMAX XT150 Black Connectors

#B9304 - DynoMAX XT150 Blue Connectors

Connector housings can be connected together as pairs or be used separately.

• Available in red, black & blue
• Low Resistance Gold Plating
• Max load: 100-120A
• Connector Diameter: 6 mm
• Maximum Stripped Wire Diameter: 5 mm
• Pass the wire through the housing, then solder the connector. Press the two parts together.
• Size: 40.3 x 9.6 x 10.8 mm
• Weight: 8 g

#B9305 - DynoMAX AS150 Anti-Spark Connectors

• Low Resistance Gold Plating
• Anti-Spark (Anti-Arching) Design for HV batteries
• Max load: 150-200A
• Connector Diameter: 7 mm
• Maximum Diameter of Wire Insulation: 7.3 mm
• Maximum Stripped Wire Diameter: 6.9 mm
• Open side for easier soldering
• Connect negative (black) connector first, then red (positive)
• Disconnect red (positive) connector first, then the black (negative)
• Pass the wire through the housing, then solder the connector. Thread the two parts together.
• Size: L49.5 x D13.5 mm
• Weight: 27.8 g

#B9320 - DynoMAX XT-90S Anti-Spark Connector

• Patent Pending Design
• Low Resistance Gold Plating 2U-3U
• Heat Resistant Housing (-20–200°C)
• Anti-Spark Function
• Solder Joint Protection Covers
• Compatible with std XT-90 connectors
• Max load: 90-120A
• Size (together) : L: 29 (49) x W21 x H10 mm
• Weight: 15 g (pair)
• Diameter: 4.5 mm
• Wire Max dia (stripped): 4.0 mm (10AWG)
• Wire insulation max diameter: 6.5 mm

#B9330 - DynoMAX MT60 3-Pole Connector

The MT60 connector contains three 3.5 mm dia bullet connectors in a yellow triangular plastic housing with practical solder-joint covers. A perfect connector system between your brushless motor and ESC.

• Low Resistance Gold Plating 2U-3U
• Heat Resistant Housing (-20–200°C)
• Solder Joint Protection Covers
• Size (together): L: 27 (47) x 12 x 12 mm
• Weight: 9.3 g (pair)
• Bullet Connector Diameter: 3.5 mm (x3)
• Stripped Wire Max dia: 3.0 mm

#B9569 - DynoMAX 5 mm Bullet Connectors for Racing Cars

10 pack of 5 mm bullet male connectors for use with high-powered electric RC cars that use LiPo batteries with bigger 5 mm female connectors.

• Low Resistance Gold Plating 2U-3U
• Weight: 2.5 g (each)
• Diameter: 5 mm
• Depth/Length: 16 mm
• Flange thickness: 2.3 mm

#B9589 - DynoMAX EC5 Connectors

• Low Resistance Gold Plating 2U-3U
• Heat Resistant Housing (-20–200°C)
• Max load: 100-150A
• Size (together) : L: 33.5 x W20 x H10 mm
• Weight: 12.7 g (pair)
• Bullet Connector Diameter: 5 mm
• Stripped Wire Max dia: 4.3 mm (10AWG)

#B9715 - DynoMAX XT60 Parallel Lightweight Adapter

Connect two battery packs with XT60 connectors together to double the capacity.

• Lightweight design
• Size: 39.4 x 17.4 x 16.6 mm
• Weight: 11.9 g

#B9716 - DynoMAX XT60 Serial Lightweight Adapter

Connect two battery packs with XT60 connectors together to double the voltage.

• Lightweight design
• Size: 39 x 17.2 x 16.9 mm
• Weight: 11.7 g

#B9720 - DynoMAX Parallel T-Connector Lightweight Adapter

Connect two battery packs with T-connectors together to double the capacity.

• Lightweight design
• Size: L: 33 x 15 x 15 mm
• Weight: 9 g

#B9721 - DynoMAX Serial T-Connector Lightweight Adapter

Connect two battery packs with T-connectors together to double the voltage.

• Lightweight design
• Size: 34 x 15 x 15 mm
• Weight: 8.4 g