New SkyRC Accessories

#SK600068 - SkyRC GC301 Car Gyro

GC301 Gyro for RC Cars, It is a device using gyro sensor and software algorithm to adjust steering output, providing you with a more stable and controlled driving experience.

The Gyro's heading hold effect manages steering output by automatically keeping the car's tires aligned in the direction you chose. It will also precisely maintain car direction regardless of the amount of traction of the track or outside force apply to the car. With heading hold, the car is more maneuverable and controllable.

Make corrective steering adjustment for RC cars:

• GC301 gyro allows you to drive the RC car toward a given direction and taking precision turns at high speeds more manageable, more controllable and more stability.

Remote gain function:

• You can adjust gain from the transmitter CH3 by using the remote gain function. Gain can also be adjusted with the trimmer on the GC301.
• Gyro Sensor: Vibration Structure Gyro
• Operating Voltage: 4-8.4V
• Current Drain: 25mA
• Operating Temperature Range: -10ºC to +45ºC
• Size: 21 x 21 x 11 mm
• Weight: 3.6 g

#SK600073 - SkyRC Signal Loss Alarm & Lost Aircraft Finder

The Signal Loss Alarm & Lost Aircraft Finder is controlled by a tiny MCU. As simple device, it can be plugged into any servo/RX port, will detect the loss of TX signal and emit a loud 85dB alarm. Ideal for warning you if you have not turned off your RX power supply while in the pits, or if you are having trouble finding a model in the long grass, simply turn off your TX the alarm will sound and the red LED will start to blink! With its versatility and small size, the Signal Loss Alarm & Lost Aircraft Finder is a "must-have" accessory for fliers.

If you don't want the alarm to beep after one minute. You can disable one minute TX inactive warning by simply move the switch to mode 2.

Features:

• Loud >85dB alarm gets your attention
• Built-in LED
• Can be used as a reminder to turn off the R/C receiver
• One minute TX inactive warning can be turn off (Mode 2)
• Plugs into any standard 4.8 - 6.0 V DC powered receiver
• Average current draw is under 2.5mA when idle, 50mA during alarm
• Small size and weight (~7-grams)
• Operating Voltage: 5-6V DC
• Alert Level: 85dB
• Protection: IP20
• Storage Temperature: -10-50℃
• Operating Temperature: 0-40℃
• Current Consumption: < 50 mA (Working mode)
• Current Consumption: < 2.5 mA (Non-working mode)
• Size: 18.1 x 18.1 x 12.9 mm (head unit, excl wires)
• Weight: 7g

#SK600072 - SkyRC Rubber Tire Sander

SkyRC Rubber Tire Sander can be powered by a 12V power supply, as well as powered directly from a 2S LiPo battery! The Tire Sander is a quick and easy way to remove the seam from the center of a new tire, without having to take 2-3 laps around the track.

Features:

• Rubber tire sander for touring class
• Powerful high torque DC motor with dual metal bearings
• Adjustable RPM of motor
• 8 LEDs indicate tire running RPM
• Light-weight aluminum case
• Quiet operation
• Protection: Input reverse polarity protection
• Tire running rotation can be changed

Tech:

• Size: 159 x 50 x 66 mm
• Input Voltage: DC 6-15V
• Minimum Input Current: 10A
• Case Material: Aluminum
• Power Supply Cable: Silicon Cable with Banana Plug
• Weight: 710g